LYCOS RETRIEVER 
Transmission Control Protocol
built 114 days ago
The IESG has approved the following document: - 'Management Information Base for the Transmission Control Protocol (TCP) ' <draft-ietf-ipv6-rfc2012-update-06.txt> as a Proposed Standard This document is the product of the IP Version 6 Working Group. The IESG contact persons are Margaret Wasserman and Thomas Narten. Technical Summary This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects used for implementations of the Transmission Control Protocol (TCP) in an IP version independent manner. This memo obsoletes RFCs 2012 and 2452. It accomplishes this by utilizing the InetAddress TC to provide IP address-independence on the management objects.
Source:
The Transmission Control Protocol (TCP) is one of the core protocols of the Internet protocol suite. TCP provides reliable, in-order delivery of a stream of bytes, making it suitable for applications like file transfer and e-mail. It is so important in the Internet protocol suite that sometimes the entire suite is referred to as "the TCP/IP protocol suite." TCP is the transport protocol that manages the individual conversations between web servers and web clients. TCP divides the HTTP messages into smaller pieces, called segments, to be sent to the destination client. It is ... responsible for controlling the size and rate at which messages are exchanged between the server and the client.
Source:
The higher layer, Transmission Control Protocol, manages the assembling of a message or file into smaller packets that are transmitted over the Internet and received by a TCP layer that reassembles the packets into the original message. The lower layer, Internet Protocol, handles the address part of each packet so that it gets to the right destination. Each gateway computer…
Source:
"Abbreviation for Transmission Control Protocol/Internet Protocol, the suite of communications protocols used to connect hosts on the Internet. TCP/IP uses several protocols, the two main ones being TCP and IP. TCP/IP is built into the UNIX operating system and is used by the Internet, making it the de facto standard for transmitting data over networks. Even network operating systems that have their own protocols, such as Netware... support TCP/IP"
Source:
The Transmission Control Protocol (TCP) standard is defined in the Request For Comment (RFC) standards document number 793 [10] by the Internet Engineering Task Force (IETF). The original specification written in 1981 was based on earlier research and experimentation in the original ARPANET. The design of TCP was heavily influenced by what has come to be known as the "end-to-end argument" [3].
Source:
To fill this need, the Transmission Control Protocol (TCP) was developed. Built on top of IP, TCP offers a reliable, full-duplex byte stream which may be read and written to in a fashion similar to reading and writing a file. The advantages to this are obvious: the application programmer doesn't need to write code to handle dropped or out-of-order datagrams, and instead can focus on the application itself. And because the data is presented as a stream of bytes, existing code can be easily adopted and modified to use TCP.
Source:
MORE ABOUT
Transmission Control Protocol