LYCOS RETRIEVER 
Network Card: Servers
built 613 days ago
If nothing is apparent at this point, try disabling the second network card. This may require that you run a command-line reconfiguration process for Blackboard so it removes any trace of what it knew about the second network card. Look at the event logs on the server to see if any errors are being reported - that could explain the problem. Although this does take down the dedicated connection, it is a necessary step that should be done to eliminate possible problem areas. If this fixes the problem, make sure you tell Blackboard support, as it would seem to indicate a possible problem with their product talking to more than one network card.
Source:
Utilizing the LTSP, you can take very low−end PCs, remove the hard drive, floppy and CDRom, and add a bootable network card. Many network cards have bootrom sockets, just waiting for a bootrom to be inserted. During the boot phase, the diskless workstation obtains its IP info and a kernel from the server, and then mounts the root filesystem from the server via NFS.
Source:
Sun Ray 2FS uses a LAN (Copper or fibre) to interface with a remote host server, and includes a smart card facility for the user's access, settings and fall back modes. The monitor interface is DVI.
Source:
MORE ABOUT
Servers