LYCOS RETRIEVER 
Hinges
built 640 days ago
Hinges should ideally be fixed with screws that match the hinge material. For example, if the hinge is made of brass, it should be fixed with a brass screw and not an aluminum screw. Otherwise, the contact between the two dissimilar metals will cause the hinge to corrode.
Source:
From this category page for Hinges, you can search 3D ContentCentral and find free Hinges models of supplier parts, including free CAD drawings and full 3D CAD models. Simply search for the Hinges you need, configure the part models, choose your CAD format, and download the component models.
Source:
As an eyepiece is placed and removed from your face under normal conditions, the stress points of the frame tend to occur at the hinges. As a spectacle wearer, you will know how easy it is to damage a frame at the hinge.
Source:
Good aspects of these hinges: They allow the door to be placed away from the wall. This eliminates the problem of towel bars and the problem of the door hitting a sink or toilet.
Source:
Spring Joints are specially designed hinges (with or without a screw?) that allow a frame to open at a greater angle then normal. The stress points of a frame are ... reduced during daily wear.
Source:
With their square barrel it might appear that these hinges are intended to be fitted flush with the back of the box. Unfortunately this is not the case and they must project out of the back to at least the point where half the hinge pin is exposed.
Source:
MORE ABOUT
Hinges