LYCOS RETRIEVER 
Flashing
built 261 days ago
Flashing is a construction detail used to seal and protects joints in a building from water penetration. The joints created by the intersection of the roof and roof mounted structures and projections, such as parapets, hatches, skylights, chimneys, vent stacks, or towers, are among the most vulnerable areas of roofing systems. They constantly expand and contract in response to changes in humidity and temperature. The greater the number of such projections, the greater the potential for serious leaks. Flashing is used at these intersections to keep rainwater from leaking into the building. It makes joints at these junctions watertight, while at the same time allowing the natural expansion and contraction of materials to continue.
Source:
Flashing is the material at the base of chimneys, stacks, and vents that is designed to waterproof the juncture where they penetrate the roof. Faulty or deteriorated flashings can cause leaks and water damage to the surrounding roof deck or eventually the interior finishes of your home. FlashSeal is a long-lasting flashing repair system designed to stop leaks from faulty or deteriorated flashings around chimneys, stacks, and vents. A professionally installed FlashSeal application carries a 7 year warranty. A properly installed FlashSeal application is like installing a custom fit waterproof boot around the base of your chimney. FlashSeal's strength and flexibility will provide years of trouble free service to help stop the damaging effects of water that can enter your home from a faulty or deteriorated flashing system.
Source:
Place the Flashing ALERT Signs on your busiest thoroughfare, one facing each traffic direction. Then place another pair on 2 busy streets that intersect the thoroughfare. Up to 4 Flashing ALERT Signs may be connected to each Remote Control Power Unit via wire line.
Source:
Flashing systems must ... pass another test. They must be able to handle the constant expansion and contraction between roofing products and those things which are not roofing products. This battle of expansion and contraction can take place on a daily or seasonal basis. The sun can create extremely hot surface temperatures during daylight hours, causing roofing materials to expand. At night, the temperature drops and the materials contract. Seasonal changes can cause the framing lumber to shrink and swell depending upon humidity and wood moisture content.
Source:
Flashing is accomplished by connecting a phone to a computer using a data cable and copying new software from the computer onto the phone by using a dedicated flashing program. Such programs are unique to each manufacturer. For example Nokia uses a program called "Phoenix" whilst Sony-Ericsson uses an advanced online program that uses a remote server called "Emma3"
Source:
Flashing must be configured to resist the three mechanisms of water penetration: gravity, surface tension, and wind pressure. To achieve this, flashing can be lapped shingle style, soldered or sealed to function as a continuous surface, or can be configured with a non-continuous profile to defeat water surface tension.
Source:
MORE ABOUT
Flashing