LYCOS RETRIEVER Beta Retriever Home  |  What is Lycos Retriever?   
Engines: Air
built 633 days ago
School model of engine Traditionally, engines are classed as external or internal combustion. External combustion engines consume their fuel or other energy source in a separate furnace or reactor. A further basis of classification concerns the working fluid. If the working fluid is recirculated, the engine operates on a closed cycle. If the working fluid is discharged after one pass through boiler and engine, the engine operates on an open cycle. The commonest types of engine use atmospheric air in open cycles both as the principal constituent of their working fluids and as oxidizer for their fuels.
Source:
All jet engines, which are often called, gas turbines, work on the principle that a tremendous thrust is required to drive the plane forward. The engine sucks air in at the front. The inlet and fan pull the air in. The compressor, raises the pressure of the air. The compressed air is then sprayed with fuel and the mixture is lit by an electric spark. The burning gases expand and blast out through the back of the engine. As the jets of gas shoot backward, the nozzle releases the air and gas mixture and the engine and the aircraft are thrust forward.
Source:
Precise Engine Repair Bruce has been servicing air-cooled engines and generators since 1967, starting his career working for a Briggs & Stratton, Tecumseh, Kohler and Onan distributor. He has attended many service schools and update clinics on various air cooled engines during this time. After taking the Briggs & Stratton MST examine in 1995, he attained the title of Master Service Technician from the Briggs & Stratton Corporation.
Source:
The A340-500 is a long-haul aircraft, equipped with four Rolls-Royce engines. The model received by TAM has a capacity of up to 267 passengers, with 42 Executive Class seats and 225 in Economy Class. TAM received the first A340-500 aircraft in October.
Source:
The Boeing-developed F-22 engine trailer (designated A/M32M-34) is a piece of ground support equipment that is required for installation and removal of the Pratt & Whitney F119 engines. The trailer ... supports the engine for on-base towing, air, and truck shipment. For air and truck shipment a shipping adapter (a support frame that fits over the top of the engine and attaches to the trailer to secure the engine) is also required.
Source:
Two-Stroke Engine The engine’s carburetor supplies the fuel and air needed for combustion. It has several adjustments. A rotating throttle arm controls the AMOUNT of fuel and air that enters the combustion chamber. The high-speed needle valve controls the MIX or proportions of fuel vs. air at mid- to high-speeds.
Source:
SEARCH
MORE ABOUT